Your Location:Home > Products center > Stone Crushing Equipment > Flotation Cell

Flotation Cell


Type: Metal ore beneficiation equipment

Supply Ability: 15 Set/Sets per Month

Port: Qingdao,Tianjin, Shanghai or others

Processed Materials: Non-ferrous metal minerals such as copper, lead, zinc, molybdenum, cobalt, tungsten, antimony, etc.

Introduction

Flotation machine (also called flotation separator) is applicable for the separation of nonferrous metal, ferrous metal and nonmetal, such as fluorite and talc. Compared with flotation cells, its uniqueness lies in big size, lower power loss and light wear and tear of the impeller. Flotation machine is commonly used ore flotation equipment in the ore dressing plants and plays a crucial role in the fast development of mining industry in China.

Flotation Cell

To adjust the height of the gate and to control of the liquid level are the useful ways for foam scraper by being scraped off. The slurry with the pharmaceutical treatment can be fixed in bubbles above with some mineral particles selectively, which is scraped off by floating on the surface, and the rest can be still retained in the slurry in order to reach the purpose of sorting the material. There are some types of flotation machine at this right minute, and the most common one is the mechanical mixing flotation machine, which is widely used in our daily life.

Flotation Cell

Flotation Cell

When flotation cell works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low pressure air sent by fan is transported to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impellers, and then goes to the trough. When the froth rises to the stable level, after the enrichment processing, it overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impellers for the remixing with air. The remaining slurry flows to the next trough until it becomes residue.

Parameter

Model KYF-1 KYF-2 KYF-3 KYF-4 KYF-8 KYF-16 KYF-24 KYF-38
Chute Dimensions Length(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Width(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Height(mm) 1100 1250 1400 1500 1950 2400 2900 3400
Single  effective Weight(t) 1.1 1.5 1.9 2.3 3.6 5.9 9.9 15.1
Effective cubage(m³) 1 2 3 4 8 16 24 38
Production Capacity calculated by slurry volume(m³/min) 0.2-1 0.4-2 0.6-3 1.2-4 3—8 4—16 4—24 10—38
Main shaft motor Model Y132M1-6 Y160M2-8 Y160L-8 Y180L-8 Y200L-8 Y250M-8 Y250M-8 Y280S-8
Power(kw) 4 5.5 7.5 11 15 30 30 37
Rotate speed(r/min) 960 720 720 970 730 730 730 740
Diameter(mm) 340 410 480 550 630 740 800 880
Height(mm) 215 256 300 340 390 460 545
Rotate speed(r/min) 281 247 219 200 175 160 150 138
Circular velocity(m/s) 5 5.3 5.5 5.76 5.77 6.7 6.25 6.36
Loam board motor Model Y90S-4 Y90S-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4
Power(kw) 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5
Rotate speed(r/min) 1400 1400 1400 1400 1400 1400 1400 1400
Loam board Rotate speed(r/min) 18 18 16 16 16 16 16 16
Diameter(mm) 500 500 580 600 600 700 700 500
Wind pressure of fan(kpa) ≥12.6 ≥14.7 ≥19.8 ≥19.8 ≥21.6 ≥25.5 ≥30.4 ≥34.3
Max. air injection amount(m³/㎡·min) 2 2 2 2 2 2 2 2

 

Model XCF-1 XCF-2 XCF-3 XCF-4 XCF-8 XCF-16 XCF-24 XCF-38
Dimensions Length(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Width(mm) 1000 1300 1600 1800 2200 2800 3100 3600
Height(mm) 1100 1250 1400 1500 1950 2400 10819 3400
Single Effective Weight(t) 1.2 1.7 2.3 2.7 3.9 6.6 8.0 16.8
Effective cubage(m³) 1 2 3 4 8 16 24 38
Production Capacity calculated by slurry volume(m³/min) 0.2—1 0.4—2 0.6—3 1.2—4 3—8 4—16 4—24 10—38
Main shaft motor Model Y132M2-6 Y160M-6 Y160L-6 Y180L-6 Y200L2-6 Y280S-8 Y280S-8 Y280S-6
Power(kw) 5.5 7.5 11 15 22 37 37 45
Impeller Rotate speed(r/min) 960 970 970 970 970 740 740 980
Diameter(mm) 400 460 540 620 720 860 950
Height(mm) 155 175 207 247 321 349
Rotate speed(r/min) 358 331 266 215 185 160 153
Circular velocity(m/s) 7.5 7.5 7.5 7 6.97 7.6 7.6 7.4
loam board motor Model Y90S-4 Y90S-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4 Y90L-4
Power(kw) 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5
Rotate speed(r/min) 1400 1400 1400 1400 1400 1400 1400 1400
loam board Rotate speed(r/min) 18 18 16 16 16 16 16 16
Diameter(mm) 500 500 580 600 600 700 700 700
Wind pressure of fan (kpa) ≥12.6 ≥14.7 ≥19.8 ≥19.8 ≥21.6 ≥25.5 ≥30.4 ≥34.3
Max. air injection amount(m³/㎡·min) 2 2 2 2 2 2 2 2

Send us a Inquiry

If you have a question about our products, we'd like to hear from you.Rest assured we won't share your name, address or phone number with anyone. We're passionate about our company and want to help any way we can. Thanks for taking the time to get in touch with us.

Product: *Name:
Phone: *Email:
Message: